Part Number Hot Search : 
BL55024 RU6888M 45M50B MA2SE01 DTB113 TA31101F 74HC02D TA124
Product Description
Full Text Search
 

To Download WS75-40000-R1K-L05 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Model WS7.5 with analog or SSI output
Compact industrial sensor for long ranges
* Protection class IP52 * Measurement ranges: 0 ... 10000 mm to 0 ... 40000 mm * Analog output 0 ... 10 V, 4 ... 20 mA, potentiometer or A/D converted synchronous serial output (SSI)
Outputs
Specifications
Resolution Material Sensing device Connector Continuation at page 28
Potentiometer: 1 kW Voltage: 0 ... 10 V Current: 4 ... 20 mA Voltage and current output, adjustable A/D converted synchronous serial max. 16 bit Analog: essentially infinite;ADSI16: max. 16 bit f.s. Aluminium and stainless steel. Cable: stainless steel Precision potentiometer 8 pin socket (M12 or DIN 45326)
Order code WS7.5 Analog or SSI
WS7.5
Model Name Measurement Range (in mm) 10000 / 20000 / 30000 / 40000 Outputs (see pages 57 ff.) R1K = Potentiometer 1 kW (other values on request) 10V = with 0 ... 10 V signal conditioner 420A = with 4 ... 20 mA signal conditioner (2 wire) 420T = with 4 ... 20 mA signal conditioner (3 wire) PMU = with 0...10 V/4...20 mA signal conditioner, adjustable ADSI16 = with A/D converted synchronous serial output 16 bit (option: 12, 14 bit) Linearity L10 = 0.10 % option: L05 = 0,05 % L25 = 0.25 % Cable fixing M4 = M4 cable fixing SB0 = Cable clip Connection M12 = 8 pin socket M12 D8 = 8 pin socket DIN 45326
Order Code Mating Connector (see accessories p. 82) D8: CONN-DIN-8F-W M12: CONN-M12-8F-G Order Example: WS7.5 - 30000 - 420T - M4 - M12
26 CAT-WS-E-05 www.asm-sensor.com ASM
Model WS7.5 with absolute or incremental encoder output
Compact industrial sensor for long ranges
* Protection class IP52 * Measurement ranges: 0 ... 10000 mm to 0 ... 40000 mm * Absolute or incremental encoder
Specifications (Continuation)
Outputs Resolution for 12 bit per revolution (4096 steps/rev.) Material Sensing device Connector Continuation at page 28
See order code Up to 30000 mm range: 0.073 mm 40000 mm range: 0.088 mm Aluminium and stainless steel. Cable: stainless steel Precision potentiometer Depending on the encoder type
Order Code WS7.5 Absolute or incremental
Model Name
WS7.5
Measurement Range (in mm) 10000 / 20000 / 25000 / 30000 / 40000 Outputs (see pages 61 ff.) ME = Mechanism only for installation of suitable multiturn encoders BK = Customer sources encoder for fitting by ASM LD5VC = Incremental encoder TTL compatible inverted PP24VC = Incremental encoder HTL compatible inverted HSSI = Absolute encoder with synchronous serial output (SSI) HSSIP = Absolute encoder with synchronous serial output (SSI), programmable HPROF = Absolute encoder with Profibus interface HINT = Absolute encoder with Interbus interface HCAN = Absolute encoder with CAN bus interface HCANOP= Absolute encoder with CANopen bus interface HDEV = Absolute encoder with DeviceNet interface HPAR = Absolute encoder with parallel interface Linearity (Option) L01 = 0,01 % Cable fixing M4 = M4 cable fixing SB0 = Cable clip
Order Code Mating Connector (see accessories page 82)
Incremental, SSI: CONN-CONIN-12F-G
Order Example: WS7.5 - 30000 - HSSI - M4
ASM www.asm-sensor.com CAT-WS-E-05 27
Model WS7.5 with analog output, or with absolute or incremental encoder output
Linearity
Specifications (Continuation)
Protection class Weight Environmental EMC Temperature Range [mm] 10000 - 30000 40000
Analog up to 0.05 % f.s. Encoder up to 0.01 % f.s. IP52 10 kg max. Refer to output specification Refer to output specification Maximum pull-out force [N] 8.0 7.0 Minimum pull-in force [N] 4.2 3.4
Cable Forces typical at 20 C
Outline drawing
Option SB0
Fastening flange Mounting flange by ASM Connectable coupling by ASM Dimensions informative only. For guaranteed dimensions consult factory
Output
Dimensions
Analog Encoder ME
Design Closed housing with connector Mounting flange
A -
B -
C 34 (Connector position) 79.5
Depending on encoder type - -
28
CAT-WS-E-05
www.asm-sensor.com
ASM
Model WS7.5 with analog output, or with absolute or incremental encoder output
Output ME
Dimensions for encoder mounting Connectable Coupling in two parts (output ME) The outer part of the coupling should be fitted to the encoder shaft. Adjust a 0.5 mm clearance between the fastening and the mounting flanges to give an initial tension on the coupling when the mounting bolts are tightened. Dimensions informative only. For guaranteed dimensions consult factory
ASM
www.asm-sensor.com
CAT-WS-E-05
29
Output Specifications R1K and 10V for WS position sensors
Excitation Voltage
Voltage divider R1K Potentiometer
32 VDC max. at 1 kW (input power 1 W max.) 1 kW 10% 25 x 10-6/ C full scale Depends on measurement range, individual sensitivity of sensor specified on label Approx. 3% ... 97% of full range -20 ... +85 C
Potentiometer Impedance Thermal coefficient Sensitivity Voltage Divider Utilization Range Operating Temperature
Signal diagram
+ Vin + Vout GND Note: The potentiometer must be connected as a voltage divider. The input impedance of the following processing circuit should be 10 MW min.
Signal conditioner 10V Voltage output
Excitation Voltage Excitation Current Output Voltage Output Current Output Load Stability (Temperature) Protection Output Noise Operating Temperature EMC
+18 ... +27 V DC non stabilized 20 mA max. 0 ... +10 V DC 2 mA max. > 5 kW 50 x 10-6 / C full scale Reverse polarity, short circuit 0,5 mVRMS -20 ... +85 C According to EN 61326:2004
Signal diagram
10V
Excitation + Excitation GND Signal + 0...10 V Signal GND
Signal Wiring
Output signals R1K + Vin GND + Vout
10V Excitation + Excitation GND Signal + Signal GND
Cable color White Brown Green Yellow
Connector pin no. 1 2 3 4
Connection Mating Connector
View to solder terminals
CONN-DIN-8F-W
CONN-M12-8F-G
ASM
www.asm-sensor.com
CAT-WS-E-05
57
Output Specifications 420A and 420T for WS position sensors
Excitation Voltage
Signal conditioner 420A Current output (2 wire)
Excitation Current Output Current Stability (Temperature) Protection Output Noise Operating Temperature EMC
+12 ... 27 VDC non stabilized, measured at the sensor terminals 35 mA max. 4 ... 20 mA equivalent to 0 ... 100% range 100 x 10-6 / C full scale Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 C According to EN 61326:2004
Signal Diagram
420A
Signal +
4...20 mA
Signal -
Signal Conditioner 420T Current output (3 wire)
Excitation Voltage Excitation Current Load Resistor Output Current Stability (Temperature) Protection Output Noise Operating Temperature EMC
+18...+27 V DC non stabilized 40 mA max. 350 W max. 4 ... 20 mA equivalent to 0 ... 100% range 50 x 10-6 / C full scale Reverse polarity, short circuit 0.5 mVRMS -20 ... +85 C According to EN 61326:2004
Signal diagram
420T
Excitation +
Signal +
4...20 mA
Excitation GND
Signal Wiring
Output signals 420A Signal + Signal -
420T Excitation + Excitation GND Signal +
Cable color White Brown Green
Connector pin no. 1 2 3
Connection Mating Connector
View to solder terminals
CONN-DIN-8F-W
CONN-M12-8F-G
58
CAT-WS-E-05
www.asm-sensor.com
ASM
Output Specification PMU for WS position sensors
Signal Conditioner PMU, adjustable Voltage output and current output (3 wire)
Excitation voltage Excitation current Voltage output Output current Output load Current output Load resistor Adjustment Activation of offset and gain adjust Scalable range Stability (Temperature) Protection Output noise Operating temperature EMC
+18 ... 27 V DC 50 mA max. 0 ... 10 V 10 mA max. 1 kW min. 4 ... 20 mA (3 wire) 500 W max. Connect with excitation GND (0 V) 90 % max. full scale 50 x 10-6 / C full scale Reverse polarity, short circuit 1 mVeff -20 ... +85 C According to EN 61326:2004
Signal diagram
Excitation + Excitation GND Signal 0...10 V + PMU Signal 0...10 V GND Signal 4...20 mA + Signal 4...20 mA GND
Output signals
Connector pin no. 1 2 3 4 5 6 7 8
Signal wiring
Excitation + Excitation GND Signal 0...10 V + Signal 0...10 V GND Signal 4...20 mA + Signal 4...20 mA GND Offset Gain
Connection Mating Connector
View to solder terminals
CONN-DIN-8F-W
CONN-M12-8F-G
ASM
www.asm-sensor.com
CAT-WS-E-05
59
Output Specification ADSI16 for WS position sensors
* * * * Description
Resolution 16 bit, data transmission synchronous serial/SSI Optional available with 12 bit (ADSI) or 14 bit (ADSI14) resolution No loss of data at power-down Easy to connect to PLC's with SSI input circuit
The sensing device of the ADSI is a precision potentiometer. The position information is given by an analog/digital converter output serialized as a data word. Data transmission takes place by means of the signals CLOCK and DATA. The processing unit (PLC, Microcomputer) sends pulse sequences which clock the data transmission with the required transfer rate. With the first falling edge of a pulse sequence the position of the sensor is recorded and stored. The following rising edges control the bit-by-bit A/D conversion, encoding and output of the data word. After a delay time the next new position information will be transmitted.
Data Format (Train of 26 Pulses)
Signal Conditioner ADSI A/D converted synchronous serial
Output Excitation voltage Excitation current Clock frequency Code Delay between pulse trains Resolution Stability (temperature) Operation temperature EMC
EIA RS-422, RS-485, short-circuit proof 11 ... 27 VDC 200 mA max. 70 ... 500 kHz Gray code, continuous progression T=30 s min. 16 bit (65536 counts) full scale; optional 12 bit or 14 bit 50 x 10-6 / C full scale -20 ... +85 C According to EN 61326:2004
Recommended Processing Input Circuit
Sensor circuit
Cable
Subsequent circuit
GND (0V)
Cable length Baud rate < 300 kHz < 100 kHz
Transmission rate
< 50 m < 100 m
Note: Extension of the cable length will reduce the maximum transmission rate. The signals CLOCK/CLOCK and DATA/DATA must be connected in a twisted pair cable, shielded per pair and common. Mating connector: view to solder terminals
Signal names
Connector pin no. 1 2 3 4 5 6 not connected
Signal Wiring
Excitation + Excitation GND (0V) CLOCK CLOCK DATA DATA Screen
CONN-DIN-8F-W
CONN-M12-8F-G ASM
64
CAT-WS-E-05
www.asm-sensor.com
Output Specifications IE58LI and IE58HI (IE41LI and IE41HI) for WS position sensors
IE58LI / IE41LI
IE58LI and IE58HI incremental
Excitation voltage Excitation current Max. frequency Output Output current Output voltage Stability (temperature) Operation temperature Protection against short circuit EMC
IE58HI / IE41HI 5 V DC 10 % 10 ... 30 V DC 120 mA max. 300 kHz 200 kHz RS422 Push-pull antivalent 30 mA 30 mA Depending on the excitation voltage 20 x 10-6 / C f.s. (sensor mechanism) -10 ... +70 C 1 channel for 1 s max. Yes According to EN 61326:2004
Output circuit and recommended processing input circuit
IE58LI
IE58HI
Output signals
Output signals
Connector CONN-CONIN-12F 12 10 5 6 8 1 3 4
Signal wiring
Excitation + Excitation GND (0V) Signal A Signal A Signal B Signal B Signal Z (reference pulse) Signal Z
Connection Mating connector
CONN-CONIN-12F-G
ASM
www.asm-sensor.com
CAT-WS-E-05
61
Output Specifications PP24V and LD5V for WS position sensors
PP24V Incremental
Output Excitation voltage Excitation current Output frequency Output current Signal level Ud High at Id=20 mA, Ub=24 V Ud Low at Id=20 mA, Ub=24 V Transition time positive edge Transition time negative edge Stability (Temperature) Operation temperature Protection EMC)
Push-pull line driver (24 V - HTL) 10 ... 30 V DC 150 mA max. w/o load 300 kHz max. 100 mA per channel 21 V 2,8 V < 200 ns < 200 ns 20 x 10-6 / C full scale (sensor mechanism) -20 ... +85 C Short circuit, overvoltage, reverse polarity According to EN 61326:2004 Line driver according to RS-422 5 V DC 10% 150 mA max. w/o load 300 kHz max. 20 mA per channel 2,5 V 0,5 V < 100 ns < 100 ns 20 x 10-6 / C full scale (sensor mechanism) -20 ... +85 C Short circuit, overvoltage According to EN 61326:2004
LD5V Incremental
Output Excitation voltage Excitation current Output frequency Output current Signal level Ud High at Id=20 mA Ud Low at Id=20 mA Transition time positive edge Transition time negative edge Stability (Temperature) Operation temperature Protection EMC
Output circuit and recommended processing input circuit
LD5V
PP24V
Output signals and output connectors
Signal wiring and connection
Output signals (Note: Do not connect pins not listed in this table) Excitation + Excitation GND (0V) Signal A Signal A Signal B Signal B Signal Z (reference pulse) Signal Z Fault detection signal Uas Shield
WS19KT: CONN-DIN-12F-W M K E F H A C D G Housing
WS19KK: CONN-CONIN-12F-G 12 10 5 6 8 1 3 4 7 Housing
62
CAT-WS-E-05
www.asm-sensor.com
ASM
Output Specification for absolute encoders with SSI interface
Excitation voltage Excitation current Interface Lines / drivers Code Resolution multiturn 3 dB cutoff frequency Control input Alarm output Status LED Connection Resolution Clock T13 ... T21 S3 T22 S2 T23 S1 T24 S0 T25 0 T26 10 ... 30 V DC 100 mA Standard SSI Clock and data / RS-422 Gray 12 + 12 bit 500 kHz Direction Alarm bit (SSI option), warning bit Green = OK, red = alarm Cable or male socket 12 pin
Signal Conditioner HSSI Absolute Encoder synchronous serial
Data format
T1 T2 T3 ... T12 Data bits 24 bit M11 M10 M9 ... M0 Mx = multiturn bits, Sx = single turn bits Cable length Baud rate < 400 kHz < 300 kHz < 200 kHz < 100 kHz Color
S11 ...
Transmission rate
< 50 m < 100 m < 200 m < 400 m Signal names
Note: Extension of the cable length will reduce the maximum transmission rate. The signals CLOCK/CLOCK and DATA/DATA must be connected in a twisted pair cable, shielded per pair and common.
Connector pin no. 8 1 3 11 2 10 5 12
Signal Wiring / Connection
Excitation + white Excitation GND (0V) brown CLOCK yellow CLOCK green DATA pink DATA grey Direction * blue 0 V signal output black * Excitation + = cw increasing code, 0 V = cw decreasing code
Connection Mating Connector
CONN-CONIN-12F-G
ASM
www.asm-sensor.com
CAT-WS-E-05
65
Output Specification for absolute encoders with programmable SSI interface
Programmable Signal Conditioner HSSIP Absolute Encoder synchronous serial
Excitation voltage Excitation current Interface Lines/drivers Code Resolution Format Programmability Control input Reset button under housing cover Alarm output Status LED Connection Cable length Baud rate < 400 kHz < 300 kHz < 200 kHz < 100 kHz 10 ... 30 V DC 250 mA SSI programmable Clock and data / RS-422 Binary or Gray, programmable 13 (9 ... 20 bit) + 12 bit MSB justified or fir tree Resolution, code, rotating direction, format, warning, alarm Direction, Preset1, Preset2 Lockable by programming Alarm bit (SSI option), warning bit Green = ok, red = alarm Cable or male socket 12 pin
Transmission rate
< 50 m < 100 m < 200 m < 400 m Signal names
Note: Extension of the cable length will reduce the maximum transmission rate. The signals CLOCK/CLOCK and DATA/DATA must be connected in a twisted pair cable, shielded per pair and common.
Color white * brown * yellow green pink grey blue black brown white red violet CONN-CONIN-12F 11 12 2 1 3 4 8 7 5 6 9 10
Signal Wiring / Connection
Excitation + Excitation GND (0V) CLOCK CLOCK DATA DATA Direction 0 V signal output RS-232 TxD RS-232 RxD Preset 1 Preset 2 * = larger width 0,5 mm2
Connection Mating Connector
CONN-CONIN-12F-G
66
CAT-WS-E-05
www.asm-sensor.com
ASM
Output Specification for absolute encoders with Profibus interface
Excitation voltage Excitation current Interface Protocol Resolution Output code Baudrate Pragrammability Integrated special functions Bus terminating resistor Connection EMC Signal name 10 ... 30 V DC 250 mA RS-485 Profibus DP with encoder profile class C2 12 (10 ... 14 ) + 12 bit Binary Automatically selected between 9,6 kBaud and 12 MBaud Resolution, preset, direction Velocity, acceleration, operating time Selectable via DIP switch Bus cover with T-manifold EN61326 : class A Cable terminal no. (bus cover) 1 2 3 4 5 6 7 8
Interface HPROF Absolute Encoder Profibus
Signal Wiring / Connection
UB in 0V in UB out 0V out B in A in B out A out
ASM
www.asm-sensor.com
CAT-WS-E-05
67
Output Specification for absolute encoders with Parallel interface
Excitation voltage Excitation current Interface Output code Resolution Output current Alarm output Control inputs Connection Input name Level (physical) 1 (+UB or open input) 0 (0 V) 1 (+UB or open input) 0 (0 V) 1 (+UB) 0 (0 V or open input) 10 ... 30 V DC 300 mA Parallel Binary, Gray, Gray Excess 12 bit + 12 bit 30 mA per bit short circuit protected NPN open collector 5 mA max. Latch, Direction, Tristate Cable 0.1 m with SUB-D 37 pin connector Function CW increasing code values CW decreasing code values Encoder data free running Encoder data stored (data hold) Outputs in tristate condition Outputs active
Interface HPAR Absolute Encoder Parallel
Control inputs
Direction Latch Tristate
Switching delay 10 s typ. for push-pull operation, for open collector signals an external pull-down resistor (1 kW) is necessary. Signal names Color brown green yellow grey pink violet grey/pink red/blue white/green brown/green white/yellow yellow/brown white/grey grey/brown white/pink pink/brown white/blue brown/blue white/red brown/red white/black brown/black grey/green yellow/grey pink/green yellow/pink green/blue yellow/blue red (0.5 mm2) white (0.5 mm2) blue (0.5 mm2) black (0.5 mm2) Connector SUB-D 37 pin 2 21 3 22 4 23 5 24 6 25 7 26 8 27 9 28 14 33 15 34 16 35 17 36 18 10 30 12 13 31 1 20
Signal Wiring / Connection
S0 S1 S2 S3 S4 S5 S6 Singleturn bits S7 S8 S9 S10 S11 M0 M1 M2 M3 M4 M5 M6 Multiturn bits M7 M8 M9 M10 M11 Alarm Direction Latch Tristate 10...30 V DC 10...30 V DC 0V 0V
Connection Mating Connector
View to encoder connector CONN-SUBD-37F
68
CAT-WS-E-05
www.asm-sensor.com
ASM
Output Specification for absolute encoders with Interbus interface
Excitation voltage Excitation current Interface Output code Baud rate Data refresh Resolution Programmability Connection EMC 10 ... 30 V 250 mA Interbus, ENCOM Profile K3 (progrmmable), K2 Binary 32 bit 500 kBaud Every 600 s 12 (10 ... 12) + 12 bit Direction, preset, offset, resolution Bus cover with T-manifold EN 50081-2, 50082-2 Differential signals (RS485) ENCOM profile K3, K2, 32 bit, binary process data DT format (according to the Phoenix company) ID code K2 ID code K3 Signal names Spi address 0 Byte no. 3 36 H (= 54 dec.) 37 H (= 55 dec.) 1 2 2 1 3 0
Interface HINT Absolute Encoder Interbus
Data format Interbus K2
Cable terminal no. (bus cover) 1 2 3 4 5 6 7 8 9 10 11 12
Signal wiring / connection
UB + GND DI1 DI1 DO1 DO1 DO2 DO2 DI2 DI2 RBST GND
ASM
www.asm-sensor.com
CAT-WS-E-05
69
Output Specification for absolute encoders with DeviceNet interface
Excitation voltage Excitation Current Interface Protocol Resolution Programmable Output code MAC ID Data refresh Baud rate Bus terminating resistor Connection EMC Characteristic impedance 10 ... 30 V DC 250 mA CAN highspeed according ISO/DIS 11898 CAN specification 2.0 A (11 bit identifier) DeviceNet according to Rev. 2.0, programmable encoder 12 (10 ... 14) + 12 bit Resolution, preset, direction Binary Selectable via DIP switch Every 5 ms Selectable 125, 250, 500 kBaud, DIP switch Selectable via DIP switch Bus cover with T-manifold EN 50081-2, 50082-2 135 ... 165 W (3...20 MHz) < 30 pF < 110 W/km > 0.63 mm > 0.34 mm2 Kbit/s 125 250 500 Cable terminal no. (bus cover) 1 2 3 4 5 6 7 8
Interface HDEV Absolute Encoder DeviceNet
Recommanded transmission
Operating capacity Loop resistance Wire diameter Wire width Segment length
Transmission rate
500 m 250 m 100 m Signal name
Signal Wiring / Connection
UB in 0V in CAN-L CAN-H Drain Drain CAN-H CAN-L
70
CAT-WS-E-05
www.asm-sensor.com
ASM
Output Specification for absolute encoders with CAN interface
Excitation voltage Excitation current Interface Protocol 10 ... 30 V DC 250 mA CAN highspeed according ISO/DIS 11898 CANopen according to DS301 with encoder profile DSP 406, programmable encoder according to class 2 12 (10 ... 14) + 12 bit CANopen: direction, resolution, preset, offset; CAN L2: direction, limit values Binary Every millsecond (adjustable), on request Selectable 10 to 1000 kBaud Selectable via DIP switches CANopen: speed, acceleration, limit values CAN L2: direction, limit values Bus cover with T-manifold EN 50081-2, EN50082-2 Cable terminal no. (bus cover) 1 2 3 4 5 6 7 8 9 10
Interface HCAN/HCANOP Absolute Encoder CANopen/CAN Layer 2
Resolution Programmable Output code Data refresh Baud rate Base identifier Integrated special functions Connection EMC Signal names
Signal wiring / connection
UB in 0V in CAN in - (dominant L) CAN in + (dominant H) CAN GND in CAN GND out CAN out + (dominant H) CAN out - (dominant L) 0V out UB out
ASM
www.asm-sensor.com
CAT-WS-E-05
71


▲Up To Search▲   

 
Price & Availability of WS75-40000-R1K-L05

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X